Atlas Roofing - Pro-Cut Hip & Ridge Shingle


	Specifications All Specs\|This Product Codes & Compliances Warranty Installation Shingle Visualizer Storm Protection Homeowner's Guide to Roofing Case Studies

Atlas Roofing Corporation introduces the Pro-Cut™ Hip & Ridge shingle for "peak" performance in hip and ridge protection in both sunbelt and snowbelt climates and anywhere between.

The StormMaster® Pro-Cut Hip & Ridge shingle is precut on a taper to save time on the roof and for a more consistent job every time. The Pro-Cut features a 5-5/8" exposure to match the typical laminates´ exposure and cover more area per shingle. The Pro-Cut is packed three shingles per strip with perforated parting lines for efficient handling on the roof.

The Pro-Cut Hip & Ridge Shingle has a seal down strip for high wind performance and utilizes SBS Modified Asphalt construction for long life and easier installation in cold weather.

Atlas offers homeowners double coverage of their Premium Protection Period on any full Signature Select™ Roof System. This product qualifies for use in the Signature Select Roofing Program when used in combination with other qualifying Atlas products.

Pro-Cut Hip & Ridge colors are available to match all regional Pinnacle™ and StormMaster™ Shingle colors.

COLORS

FINAL COLOR SELECTIONS SHOULD BE MADE USING ACTUAL SHINGLES.
Please consult your Atlas distributor for specific color availability and for actual shingles. Colors and photos represented on this Atlas website and the shingle visualizer should only be used as a guideline for your color selection.

WARRANTY
Pro-Cut Limited Shingle Warranty

Limited Warranty: ATLAS ROOFING CORPORATION ("Atlas") warrants to you, the original owner of its roofing product, that the roofing products listed in the link below, are free from manufacturing defects, which result in leaks.
Atlas Limited Shingle Warranty

MAINTENANCE
Every effort should be made to keep roof traffic to a minimum. Regular roof maintenance should be performed in the cooler parts of the day.

INSTALLATION
Pro-Cut Hip & Ridge Installation Instructions

These instructions MUST be followed to ensure desired appearance and maximum performance. Please note the following important features:

Complete Instructions

STORAGE
Store on flat surface. Protect from weather during storage and on job site. Sealant protection tape is placed on the back of each shingle and does not have to be removed before applying.

AT TEMPERATURES BELOW 40°F, CARE SHOULD BE TAKEN TO AVOID DAMAGE TO THE EDGES OR CORNERS OF SHINGLES. IN EXTREMELY HOT WEATHER (ABOVE 90°F) STORE SHINGLES IN SHADED AREAS.

SALES OFFICES
Ardmore
_________________________
length: 12" / 304.8 mm
width: 12.5" / 317.5 mm
exposure: 5-5/8" / 142.9 mm
coverage per bundle: 31 lineal feet
Meridian
_________________________
length: 12" / 304.8 mm
width: 12.5" / 317.5 mm
exposure: 5-5/8" / 142.9 mm
coverage per bundle: 31 lineal feet
Daingerfield
_________________________
length: 12" / 304.8 mm
width: 12.5" / 317.5 mm
exposure: 5-5/8" / 142.9 mm
coverage per bundle: 31 lineal feet
Sales Offices

CODES & COMPLIANCES

ASTM
D 3018, Type I
D 3161, Type I, Class F
D 3462 As Manufactured
E 108, Class A Fire Resistance

UL
790 Class A Fire Resistance
997 Wind Resistance
2218 Class 4 Impact Resistance*

CAN/CSA-A123.5-M90
Florida Building Code Approved -
#FL-784-R2
Miami Dade Compliance Requirements
NOA No. 07-0927.06 (StormMaster Slate)
NOA No. 05-0120.02 (StormMaster LM)
NOA No. 05-0120.03 (Pinnacle)
Matches Wind Performance of Atlas Field Shingles

* UL 2218 for Class 4 Impact Resistance is only applicable to product manufactured out of Ardmore, OK.

Spec this Product

[TOP]

Features & Benefits

Traditional Appearance Excellent for Roofing or Reroofing Needs

Atlas´ Quality World Renown For Over 20 Years